Check that the diode bridges are correctly positioned and/or broken

1. There are 4 pins on the diode bridges (see exploded view on your manual part 13): There are 3 cables connected to it. Do not touch the red and black disconnect and move the remaining cable on the pin left free. If the fuse blows again proceed to step 2.

2.Replace the defective bridge(s).

3.The airframe plates are shorted because they are not attached to the housing. Replace the airframe.

Alternative :

4.If the circuit board has just been replaced:

- Check that the connection is correct (120 V or 220 V )

- Check the transformer inside the Chloe power supply box.

( If your device is under warranty, file a warranty claim.)