Problem

Your spa doesn’t heat up or not enough.
 

Origin

Poor water circulation in the filtration pump.
 

Resolution

Check that the water line in the pool is between the min and max limits. If this is not the case, fill or empty your spa so that the water line is between these two limits

It is also necessary to clean the 2 nozzles (suction and discharge) located inside the basin (photos). To do this, just unscrew these nozzles and remove any filth (hair, fur, dead skin...).

The problem can come from the filter cartridge. Operate the spa by removing this filter for 24 hours. If this works, then it is necessary to clean or replace the filter cartridge.

If, despite testing and replacing the filter cartridge, the problem persists, you need to replace the heating resistor. To do this, follow the procedure below:

If your product is out of warranty (over 2 years), you can order spare parts from our online store.

If your product is still under warranty (less than 2 years), please open a support request, enclosing your purchase invoice and a photo of the problem.

ATTENTION: If, during the repair, the problem is solved with the manipulations described above, we will be obliged to invoice you for labor and reshipment costs.